World Ninja League

The Spine v2 takes the original design to new heights with several notable improvements. Constructed entirely out of steel, the slim, lightweight design ensures a sturdy and reliable structure. With its 8-foot length, it effortlessly integrates into …

Our Warped Walls are manufactured to order and are available in 6 different heights to fit your space. All sizes of Warped Walls are 4' wide. High quality materials and CNC cut panels ensure a perfect fit and a professional quality product. All Warpe…

Part of the Makercraft Combo Catch Series, the Special Delivery obstacle is a must-have for precision training and versatile workouts. Its iconic design has become so essential that obstacles featuring slots often refer to them as "Special Delivery".…

As featured in Stage one of the 2020 National Ninja League World Championships. This obstacle will keep those ninjas busy for hours. 12" Diameter hand holes 3 Peg holes Now available to be mounted on a 1.25" (1.66" Outside Diameter) or 1.5" (1.90".…

These flywheels are made of strong baltic birch which is cut by CNC machine tools then laminated for strength and sandwiched around a layer of acrylic for a stunning visual effect.   Flywheels slide over cross pipes and are secured in place by t…

The Full Throttle is designed to challenge a ninja's balance, coordination, and footwork. At rest, the vinyl pad is positioned at a 60-degree angle. The objective is for the ninja to step onto the pad and leverage their weight and footwork to level i…

The Lily Pad is the perfect addition to any ninja training course! Designed to challenge balance and agility, the Lily Pad features a 13-inch diameter padded vinyl top that provides a safe and comfortable surface for stepping. The padded base easily.…

Skyhooks are a must-have for any ninja rig, offering dynamic lache challenges with rings, bats, or other handheld obstacles. Set them up in pairs to create an even greater test by catching them with a bar. The hooked ends of the Regular version featu…

Cliffhangers are a staple in ninja training, perfect for building finger strength, grip endurance, and upper body control. Whether you're creating a cliffhanger lane, adding variety to a pegboard, or mixing up your climbing challenges, these ledges..…

This Stainless Steel Ring has a 9.84" OD / 8.26" ID diameter and is perfect for a pipe slider and many other uses. The ring is 0.7" thick and lightweight, approximately 0.5 lbs.   Outside Diameter: 9.84" Inside Diameter: 8.26" Thickness: 0...

The Peg Grasper is a simple hold that takes a common design and turns it into something completely new and extremely functional. Unlike any other door knob or ring toss, the Peg Grasper can also take a 1-1/4 inch peg, standard peg board size, allowin…

Introducing the Mallet, an exciting twist on swinging barrels! The Mallet not only challenges your swinging abilities but also tests your grip strength and agility. Maintain precision in your transitions and landings to overcome this unique challenge…

The Tik Tok is an 8' long swinging obstacle covered in padded vinyl, and features a stable platform for you to stand on while you conquer its swinging motion. The Tik Tok is designed with a pillow block bearing, ensuring a smooth and controlled swing…

Take your ninja training to the next level with the Swivel Steps, a unique twist on the classic angled steps. Designed for versatility and challenge, these steps rotate 90 degrees on a secure wooden base, allowing for dynamic movement and unpredictab…

Use these risers under a set of  Angled Steps to create the ascending steps obstacle, with each of the 5 steps getting progressively higher. Or use them as mounting blocks for other obstacles. The risers are covered in carpet bonded foam and com…

The spider climb is designed to be added on to a freestanding warped wall to create another challenging obstacle. The back side features pre-installed t-nuts for installing rock holds or cliff hangers, and the inside is smooth so that is can be used …

The Angled Steps are a basic required item for any ninja training facility. These steps are sturdy and stable wood angled boxes padded on all 5 sides and have hook fasteners on the bottom so they will stay in place on carpet bonded foam. The design o…

The Peg Grasper transforms a familiar design into something entirely innovative and highly functional. Distinct from typical door knobs or ring tosses, it can be used with a 1-1/4" inch peg, opening up a variety of uses within a compact footprint...

Choose from your traditional three strand 1-1/2"rope or a 1-1/4" rope for your younger climbers. Comes complete with eye fitting ready to attach to your ceiling attachments. Optional Ceiling attachments are available. DGS recommends all climbing rope…

Get a firm grip on the action with the Pipe Coaster Rolling Bar! This durable rolling bar is the essential handhold for traversing the double rails of the Pipe Coaster ninja obstacle. Constructed from robust, powder-coated black steel and measuring 5…