Equipment

Take your ninja training to the next level with the Swivel Steps, a unique twist on the classic angled steps. Designed for versatility and challenge, these steps rotate 90 degrees on a secure wooden base, allowing for dynamic movement and unpredictab…

Use these risers under a set of  Angled Steps to create the ascending steps obstacle, with each of the 5 steps getting progressively higher. Or use them as mounting blocks for other obstacles. The risers are covered in carpet bonded foam and com…

These large wooden rings are made of strong laminated wood. Available in 12", 18" and 24" diameter, these rings can be used for numerous different hanging obstacles. Hang them by straps or directly on the pipes to create almost anything you can dream…

The spider climb is designed to be added on to a freestanding warped wall to create another challenging obstacle. The back side features pre-installed t-nuts for installing rock holds or cliff hangers, and the inside is smooth so that is can be used …

The DGS Ninja Wooden Rings weigh in at .4 lbs. each, have an outer diameter of 9.25", and are 28 mm thick. They are constructed from laminated beech wood that is milled and then sanded smooth. Wooden Rings can be used in many ways, such as with...

The Angled Steps are a basic required item for any ninja training facility. These steps are sturdy and stable wood angled boxes padded on all 5 sides and have hook fasteners on the bottom so they will stay in place on carpet bonded foam. The design o…

The Peg Grasper transforms a familiar design into something entirely innovative and highly functional. Distinct from typical door knobs or ring tosses, it can be used with a 1-1/4" inch peg, opening up a variety of uses within a compact footprint...

Fly through your course with confidence using the Flying V, a versatile resin obstacle designed for powerful two-handed grips. Shaped like a “V” and hung upside down, this 45° angled hold challenges athletes to maintain control while.…

Compact yet challenging, the 4" Mini Riser Cliff features a 20-degree upward slope that creates a friendlier grab point in a smaller format. Its reduced size demands accuracy and control while still offering a secure feel on dynamic moves. Flip it to…

The 12" Riser Cliff features a gentle 20-degree upward slope that gives your fingers a natural resting point, making it easier to latch onto than a flat or downward-sloped hold. This design reduces slip while still engaging your grip strength during.…

The Boulder is a large climbing hold that adds variety and challenge to any wall. Measuring 8" x 7" x 4", it provides a solid, textured grip to test strength, control, and technique. Key Features: Large climbing hold measuring 8" x 7" x 4" Secures w…

The Skateboard is a versatile rolling obstacle designed to challenge balance, coordination, and control. Made with a padded vinyl top, it's comfortable to kneel or sit on during movement drills. Durable wheels allow it to glide smoothly, making it a.…

The Surfboard is a dynamic balance obstacle that functions like a see-saw, challenging athletes to stay centered and controlled. It features a 3' x 1' padded top platform mounted on a pivot point between two pedestals positioned approximately 5" belo…

The Swinging Door is a vertically mounted ninja obstacle designed to test coordination, control, and timing. Measuring 72" tall by 23" wide, it hangs from two pillow block bearings that allow it to swing smoothly along a mounted pipe. Athletes engage…

The Gate Keeper is a powerful rig-mounted obstacle that transforms an 8' wide ninja lane into a swinging challenge. Designed to mount directly onto DGS Ninja Steel Rig uprights, the Gate Keeper features a 6ft long vertical pipe that threads through t…

Bring a splash of creativity to your course with the Seashell by Addy Herman. Shaped like a half shell, this obstacle features smooth, rounded edges perfect for gripping and swinging. Its open design encourages dynamic movement and offers a playful..…

Crawl, climb, and conquer with the inflatable Tunnel. Measuring 6.5 feet long and nearly 4 feet in diameter, this obstacle hangs with straps, offering a unique enclosed challenge as athletes navigate through its spacious interior.The Warrior Course..…

Add a playful yet rigorous challenge with the Cheeseboard. This 9-foot-long and 6-foot-wide rectangular inflatable mimics a piece of Swiss cheese, complete with hole cutouts. Suspended vertically with straps, athletes must cling to its openings to sc…

The Magnifying Glass ninja obstacle brings versatility and creativity to your training setup! Shaped like an actual magnifying glass, this unique obstacle can be used in multiple ways to add variety and challenge to your course. Hang it by the ring f…

Bring the thrill of ninja training into your home with the Home Ninja System: Cliff Board. Perfect for basements, garages, or any room with enough ceiling space, this ceiling-mounted setup offers a versatile workout experience with multiple obstacle.…