Deals

Cliffhangers are a staple in ninja training, perfect for building finger strength, grip endurance, and upper body control. Whether you're creating a cliffhanger lane, adding variety to a pegboard, or mixing up your climbing challenges, these ledges..…

The Salmon Ladder Bar is made of 1" Sch40 Aluminum that is both lightweight and durable. The two rubber ends add extra protection and helps reduce noise. The 5ft length is compatible with all DGS Ninja Salmon Ladders, but if your Salmon Ladder needs …

The 3 Ball 12" Limiter is considered the standard in underhand ninja grip training.    Specifications: 12" long x 2" wide 2" tall with a 7/8" vertical limit includes seven 3" screws required for mounting Mounts easily to any door jam or 1.…

The 3 Ball Limiter is considered the standard in underhand ninja grip training. The Mini Limiter is great for placing and forcing single handed grabs,   Specifications: 4" long includes three 3" screws required for mounting Mounts easily to any…

Put your skills to the test with The Clock Hands! This expert-level obstacle features two swiveling 25.5" arms (15" on the Kids version) that pivot in opposite directions. The Clock Hands are heavyweight and incredibly durable. Their self-resetting..…

The Judge is a perfect hybrid between a jug and a ledge hold. This versatile ninja hold is 4.5" wide and mounts with three screws for a secure fit. Offering a more forgiving grip than the Mini Limiter, it’s ideal for athletes looking for that s…

The Wave Cliff brings a new twist to traditional cliffhanger challenges with its unique wavy grip design. Crafted from durable resin, this 12" long x 2" wide obstacle tests your finger strength and precision in an exciting new way. The wave-shaped to…

Elevate your training with the 8" Mini Tri-Cliff, a dynamic ninja hold perfect for intermediate to advanced athletes. This 8" long cliffhanger features two angled sides that form a peak and one straight side. For a classic cliffhanger challenge, moun…

Elevate your training with the 13" Tri-Cliff, a versatile and challenging ninja hold designed for intermediate to advanced athletes. This 13" long cliffhanger features a unique design with two angled sides forming a peak and one straight side. Mount …

The 7" Mini Sloper is designed to test even the most advanced athletes with its steep 75-degree slope. Measuring 7 inches in length and 2.5 inches thick, the Mini Sloper provides just enough surface to grasp, making it a perfect addition to any ninja…

The Slide Box provides an innovative challenge that tests coordination, grip strength and precision. Athletes will slide the included PVC tube along the pipe, pushing it through the box. The goal is to maneuver the tube far enough through the box so …

The Door Drop, measuring 6' x 2', is a perfect transition obstacle for your course run. Hang the Door Drop from straps using the D-rings at the top, and mount the pillow block bearings on a 1.25" (1.66" OD) cross-pipe below (sold separately). The...

Take your grip strength to new heights with the I-Beam, a formidable challenge for any ninja warrior. Climb down the base of the L-shape design and proceed to the stem where you'll hang underneath and use your grip strength to traverse the remainder …

Elevate your ninja course with the thrilling Door Punch obstacle, designed to test strength, coordination, and precision. This engaging challenge consists of two main components: the Battering Ram and the Doors. The Battering Ram is suspended from pi…

The Windshield Wiper by BarnBuilt hangs vertically from a 6' pipe, and features a 3' horizontal pipe for you to swing from. Equipped with a pillow block bearing, the Windshield Wiper can swing freely in 360 degrees. Alternatively, use a strap to secu…

The Paddle Cliffs by BarnBuilt are the ultimate cliffhanger challenge. These cliffhangers feature a 45-degree slope on top and a capped end with a matching angle, enhancing the difficulty level for ninjas. Mount the Paddle Cliffs at 45 degrees with t…

A 1" deep, beveled, dual texture cliff rail. The cliff rail is for advanced climbers and ninjas.    Specifications: 12" long includes six 2-1/2" screws required for mounting striated/grippy texture

The Floor Mounted Drum Hopper is a unique obstacle that will put your balance and upper body strength to the test. Padded vinyl ovals sit atop sturdy pipes, requiring you to rely on your hands to maintain stability as you navigate across the obstacle…

These Shields hang vertically from two cross pipes and have cliffhangers mounted on each side. Used in the Lache Skills Competition at the 2022 National Ninja League World Championships. Made of laminated Baltic Birch with fittings to mount on 1.25" …

Use to perform a wide range of balance, core, strength, flexibility and rehabilitation exercises. Improves, maintains and strengthens hard to reach muscles. Made from the highest quality Italian resin materials.   20 in (53 cm)