World Ninja League

The DGS Ninja Hanging Trapeze is constructed from strong, laminated Baltic Birch. It can be easily hung by threading the two included nylon straps through the holes that are CNC cut on either end of this obstacle. We recommend using...

Take your ninja training to the next level with the Swivel Steps, a unique twist on the classic angled steps. Designed for versatility and challenge, these steps rotate 90 degrees on a secure wooden base, allowing for dynamic movement and unpredictab…

Use these risers under a set of  Angled Steps to create the ascending steps obstacle, with each of the 5 steps getting progressively higher. Or use them as mounting blocks for other obstacles. The risers are covered in carpet bonded foam and com…

These large wooden rings are made of strong laminated wood. Available in 12", 18" and 24" diameter, these rings can be used for numerous different hanging obstacles. Hang them by straps or directly on the pipes to create almost anything you can dream…

The spider climb is designed to be added on to a freestanding warped wall to create another challenging obstacle. The back side features pre-installed t-nuts for installing rock holds or cliff hangers, and the inside is smooth so that is can be used …

The Angled Steps are a basic required item for any ninja training facility. These steps are sturdy and stable wood angled boxes padded on all 5 sides and have hook fasteners on the bottom so they will stay in place on carpet bonded foam. The design o…

The Peg Grasper transforms a familiar design into something entirely innovative and highly functional. Distinct from typical door knobs or ring tosses, it can be used with a 1-1/4" inch peg, opening up a variety of uses within a compact footprint...

The Salmon Ladder Bar is made of Sch40 Aluminum that is both lightweight and durable. The 4ft Kids Bar is 3/4" thick while the 5ft Adult Bar is 1" thick aluminum. Two rubber caps on the ends of the bar add extra protection and helps reduce noise. The…

The 12" Limiter is considered the standard in underhand ninja grip training.    Specifications: 12" long x 2" wide 2" tall with a 7/8" vertical limit includes seven 3" screws required for mounting Mounts easily to any door jam or 1.5"...

The Limiter is considered the standard in underhand ninja grip training. The Mini Limiter is great for placing and forcing single handed grabs,   Specifications: 4" long includes three 3" screws required for mounting Mounts easily to any door j…

Choose from your traditional three strand 1-1/2"rope or a 1-1/4" rope for your younger climbers. Comes complete with eye fitting ready to attach to your ceiling attachments. Optional Ceiling attachments are available. DGS recommends all climbing rope…

The Skateboard is a versatile rolling obstacle designed to challenge balance, coordination, and control. Made with a padded vinyl top, it's comfortable to kneel or sit on during movement drills. Durable wheels allow it to glide smoothly, making it a.…

The Surfboard is a dynamic balance obstacle that functions like a see-saw, challenging athletes to stay centered and controlled. It features a 3' x 1' padded top platform mounted on a pivot point between two pedestals positioned approximately 5" belo…

The Gear Mounting board can be used to mount 3 gears in a connecting sequence. The included pipes can be mounted to your rig with scaffolding clamps (sold separately). 10' L x 6' H

The Venus Fly Trap is a versatile ninja cradle padded with grippy rubber. Perfect for single-use setups with the Metal Cane, this obstacle also works great in sequences when paired with multiple cradles for traditional fly bar runs. The Venus Fly Tra…

The Swinging Door is a vertically mounted ninja obstacle designed to test coordination, control, and timing. Measuring 72" tall by 23" wide, it hangs from two pillow block bearings that allow it to swing smoothly along a mounted pipe. Athletes engage…

The Monkey Hop is a ninja obstacle designed to challenge grip strength, control, and explosive coordination. This obstacle includes one center-mounted slider, two wooden cradles, and two aluminum pegs. Athletes begin by placing a peg in each side of …

The Tilting Block is a versatile balance obstacle designed to test control, coordination, and focus. Measuring 24" wide, the padded vinyl block sits atop a raised pedestal that shifts and tilts under pressure, forcing athletes to adjust on the fly as…

The Mouse Trap is a timing-based ninja obstacle that challenges athletes to react fast and commit with precision. Designed by BarnBuilt, this unique hold features either a 1.5" or 2" thick cliffhanger ledge that’s hidden behind a hinged, padded…

The Toe Hook is a unique ninja obstacle designed to challenge your grip, core control, and balance all at once. Its unstable nature forces athletes to engage multiple muscle groups while carefully navigating from underneath. This obstacle mounts with…