As Seen in WNL

The Slide Box provides an innovative challenge that tests coordination, grip strength and precision. Athletes will slide the included 2" PVC tube along the pipe, pushing it through the box. The goal is to maneuver the tube far enough through the box …

The Door Drop, measuring 6' x 2', is a perfect transition obstacle for your course run. Hang the Door Drop from straps using the D-rings at the top, and mount the pillow block bearings on a 1.25" (1.66" OD) cross-pipe below (sold separately). The...

Take your grip strength to new heights with the I-Beam, a formidable challenge for any ninja warrior. Climb down the base of the L-shape design and proceed to the stem where you'll hang underneath and use your grip strength to traverse the remainder …

Elevate your ninja course with the thrilling Door Punch obstacle, designed to test strength, coordination, and precision. This engaging challenge consists of two main components: the Battering Ram and the Doors. The Battering Ram is suspended from pi…

The Gear is the ultimate ninja obstacle to power up your rig. What sets the Gear apart is its interactive nature—when you install multiple Gears adjacent to each other, they interlock and move together, creating a captivating and complex obstac…

The Orange Slice by BarnBuilt is a compact and versatile swinging obstacle. Shaped like an orange slice, this unique obstacle brings a fun and engaging element to your setup. Swing by grabbing onto the jug cliffhanger or the optional bar attachment (…

The Beetle by BarnBuilt is a versatile and exciting addition to your ninja course. Unlike typical flipping obstacles, the Beetle offers multiple grip options to challenge your skills. One side features a cliffhanger, while the other side boasts a jug…

Burning Rubber by BarnBuilt offers a thrilling challenge to test your balance and agility. This obstacle features a 12" diameter barrel covered in padded vinyl that spins freely when stepped on. For a more controlled challenge, use the included stopp…

Designed with a hook shape, the Metal Cane by BarnBuilt offers a length that strikes the perfect balance: not as short as Lobster Claws and not as long as Ninja Canes. Crafted from durable, lightweight aluminum, the Metal Cane ensures longevity and e…

The Windshield Wiper by BarnBuilt hangs vertically from a 6' pipe, and features a 3' horizontal pipe for you to swing from. Equipped with a pillow block bearing, the Windshield Wiper can swing freely in 360 degrees. Alternatively, use a strap to secu…

The Single Mount Cliffhanger Board is a great way to add cliffhanger challenges to your rig. With two pipe clamps for easy installation on a vertical pipe, setting up is a breeze. These rig-friendly clamps fit both 1.25" (1.66" OD) and 1.5" (1.90" OD…

The Mini Throwback 2.0 is a smaller version of the Mega Throwback 2.0. This improved version features sleek cutouts that minimize weight and a 1.5" cliffhanger for more versatility. When swinging, throw it back and jump to the next set of handle…

The Mega Throwback v2 works exactly as it sounds: throw it back and jump to the next set of handles. This improved version features sleek cutouts that minimize weight and a 1.5" cliffhanger for more versatility.  The Mega Throwback v2 has a pill…

The Spinning Disk is designed to be mounted vertically on a pipe, secured with pillow block bearings at both the top and bottom, ensuring a smooth and controlled rotation. The Spinning Disk is 16" in diameter and features an 18mm lip on one side,...

The Monstro Semisphere is a semi-spherical hold perfect for compression or campus training. Mount with standard 3/8” hex bolt to a t-nut or 4” wood screws. Key Features: 4" or 6" wide slight curve back grippy texture

Train precision and grip strength with the Makercraft Cliff Hopper Module. This versatile attachment for The Spine v2 features a single cliffhanger mounted to a sturdy board, allowing for multiple grip options. Athletes can grab onto the cliffhanger.…

The Spine v2 takes the original design to new heights with several notable improvements. Constructed entirely out of steel, the slim, lightweight design ensures a sturdy and reliable structure. With its 8-foot length, it effortlessly integrates into …

The Salmon Ladder Bar is made of Sch40 Aluminum that is both lightweight and durable. The 4ft Kids Bar is 3/4" thick while the 5ft Adult Bar is 1" thick aluminum. Two rubber caps on the ends of the bar add extra protection and helps reduce noise. The…

Developed in collaboration with World Ninja League and Monstro, the WNL Chuck eliminates the guesswork around bolt usage during competition. This redesigned chuck features an integrated bolt blocker that prevents athletes from grabbing the mounting..…

The Makercraft V-Formation Module offers a dynamic grip challenge with its angled design and multiple diameter options.Shaped like a V and made of steel, this unique module is designed to mount directly to The Spine v2. Whether you're training for po…