Red Fidget Spinner with Embedded Polymer
Black Fidget Spinner with Embedded Polymer
Blue Fidget Spinner with Embedded Polymer
Green Fidget Spinner with Embedded Polymer
Yellow Fidget Spinner with Embedded Polymer
White Fidget Spinner with Embedded Polymer
Red Fidget Spinner with Pillow Block Bearing
Black Fidget Spinner with Pillow Block Bearing
Blue Fidget Spinner with Pillow Block Bearing
White Fidget Spinner with Pillow Block Bearing
Yellow Fidget Spinner with Pillow Block Bearing
Green Fidget Spinner with Pillow Block Bearing

As featured in Stage one of the 2020 National Ninja League World Championships. This obstacle will keep those ninjas busy for hours.

  • 12" Diameter hand holes,
  • Peg holes (Includes 2 pegs)
  • Available to be mounted on a 1.25" (1.66" Outside Diameter) or 1.5" (1.90" Outside Diameter) cross pipe, and with your choice of pillow block or embedded polymer bearing.
  • Can also be hung using straps in a number of different ways.

The Fidget Spinner is 36" tall and, when mounted on a pipe, it will need 18" of clearance for a full 360 degree spin of the obstacle. 

WARNING: These items are not toys. Activities involving motion and height create inherent risk of serious injury including paralysis or death. These products are intended for use by properly trained participants under qualified supervision, and the user of this product therefor assumes this risk. Always know your physical limitations and limits of your equipment. Avoid landing on head or neck as serious injuries may result. Always check for proper mat positioning, equipment stability, and inspect hardware for wear and damage before and after each use. Do not use if signs of damage or excessive wear are present. DGS shall not be liable for personal injury or property damage incurred through the use of purchased items.

RECENTLY VIEWED PRODUCTS