Equipment

The Mini Throwback v2 is a smaller version of the Mega Throwback v2. This improved version features sleek cutouts that minimize weight and a 1.5" cliffhanger for more versatility. When swinging, throw it back and jump to the next set of handles. The …

The Mega Throwback v2 works exactly as it sounds: throw it back and jump to the next set of handles. This improved version features sleek cutouts that minimize weight and a 1.5" cliffhanger for more versatility.  The Mega Throwback v2 is availab…

The Spinning Disk is designed to be mounted vertically on a pipe, secured with pillow block bearings at both the top and bottom, ensuring a smooth and controlled rotation. The Spinning Disk is 16" in diameter and features an 18mm lip on one side,...

The Keystone v2 brings a new challenge to lock-and-key obstacles with improved design and versatility. Upgraded from the original, it now features a backer board and includes scaffolding clamps for secure mounting. Attach it vertically to a pipe with…

The Palm Flip is an exhilarating ninja obstacle that will put your agility and timing to the test! This unique challenge begins in an upright position, with the arms resting against an overhead crosspipe. You start by hanging on to the cliffhangers n…

A 1" deep, beveled, dual texture cliff rail. The cliff rail is for advanced climbers and ninjas.    Specifications: 12" long includes six 2-1/2" screws required for mounting striated/grippy texture

Beautiful sandstone climbing holds, sold as a set of 4! This set has a 3/8 bolt and set screw hole in each hold to stop rotation. These semi juggy holds will look as great as they feel on any route. Holds range from 4-6 inches with a finger deeep jug…

A super juggy climbing/OCR hold with a very juggy top grab that's sure to make any wall climb interesting. Grippy Texture Screw hole for anti-rotation Very juggy grab

The Gable Cliff Board / Pegboard is a 10-foot long mounting board that features an angled design. This allows you to incorporate inclines or declines into your challenges, adding an extra layer of intensity. Available in black for Indoor Use Only...

The Raised Platform is a one-of-a-kind start/stop platform designed to fit over mats up to 8' wide. The wooden sides of the platform feature ergonomic handles for easy transportation. The platform top consists of a durable steel frame that is padded …

The Ring with Strap is a classic ninja combination! Includes one Wooden Ring and one blue Nylon Strap is 0.7" (18 mm) wide and 48" (120cm) long.

The G2N® Air Spot is a deceptively simple yet challenging obstacle that will put your ninja skills to the test. This innovative obstacle will have you strategizing your every move as you hop, swing, and balance from one spot to the next. Each ste…

Introducing the G2N® Air Piston – a thrilling new addition to your gym's ninja course that will challenge athletes of all skill levels. Perfect for developing coordination and strength, this unique obstacle demands precision and balance. St…

The G2N® Air Door is a versatile obstacle that enhances agility and strength training by offering multiple ways to navigate through it. Switch between in-line and head-on configurations to vary the difficulty and keep your athletes engaged. Jump,…

Introduce an exhilarating new challenge to your ninja course with the G2N® 8ft Air Bridge! This inflatable bridge enhances agility and balance training with its dynamic wobble. Navigate from one end to the other using the 6 directional arrows,...

Salmon Ladder Pegs are 10" and compatible with our Salmon Ladders. Salmon Ladder Pegs are sold individually.

The Floating Skyhook was developed by Matt Bradley and made here at our DGS Ninja facility. Hang this versatile obstacle in a variety of different manners to create numerous challenges for ninjas of all levels. The Floating Skyhook is 9.5" x 6" …

A cow bell you can connect to your climbing ropes or nets. Bells come with an attached break away lanyard making it easy to attach to equipment. 3.25 bell; 36 x 3/4 lanyard.

Slip on to the bottom of any 1.5 dia. climbing rope and tie knot under disc to form a seat or platform. 12 dia. X 3/4 thick poly disc; 1.5 I.D. center hole. NOTE: Can be added to any Jammar climbing rope PRIOR to fabricati…

Three-piece agility bridge for junior ninja courses. This Obstacle allows your ninja athletes to leap over, run across, or duck under the "bridge." The three-pieces are securely held together with hook-and-loop tabs so you can easily disassemble…