Equipment

Trapezoid 36" x 48" x 60"  Special 3/4" plywood used for a strong and smooth finish  All connector holes are precision drilled for exact location matching walls, floors and other IOS boxes    This box is only shipped...

4.5' x 4.5' x 3' x 1.5' Special 3/4" plywood used for a strong and smooth finish  All connector holes are precision drilled for exact location matching walls, floors and other IOS boxes    This box only ships fully assembled via motor.…

4.5' x 1.5' x 3' Special 3/4" plywood used for a strong and smooth finish  All connector holes are precision drilled for exact location matching walls, floors and other IOS boxes    Can be shipped knocked down with assembly required OR…

4.5' x 4.5' x 3' Special 3/4" plywood used for a strong and smooth finish  All connector holes are precision drilled for exact location matching walls, floors and other IOS boxes Optional shown Padded Top available for additional cost Can be...

4.5' x 4.5' x 6' Special Baltic Birch 3/4" plywood is used for a strong and smooth finish  All connector holes are precision drilled for exact location matching walls, floors and other IOS boxes    Can be shipped knocked down with...

The Ninja Pegball takes pegboard training to the next level! Designed as a versatile add-on for our Ninja Pegboard and Home Ninja System: Pegboard, this unique hold combines the grip of a round ball with the control of a peg handle. Use it as a...

The DEMO Any Angle fits The Spine 2.0. Access a whole new world of possibilities by pairing The Spine modules with the Any Angle! It attaches to The Spine with two Hitch Pins (not included). The obstacle modules are easily attached with the two inclu…

The Monstro Saber Chuck is a nunchuck-style grip trainer forged for sci-fi fans. Inspired by ANW competitor Jedi Markowski, this unique hold features a fluted black handle and a tapered colored “blade” that narrows from 1.5" to 1", giving…

Ooooo scary! The Skull Beast Ball is an intimidating addition to any osbtacle line. As seen at the OCR World Championships.   Specifications: 6" tall ~6" gripping surface Grippy texture

The Monstro Semisphere is a semi-spherical hold perfect for compression or campus training. Mount with standard 3/8” hex bolt to a t-nut or 4” decking screw Specifications: 4" or 6" wide slight curve back grippy texture

Train precision and grip strength with the Makercraft Cliff Hopper Module. This versatile attachment for The Spine v2 features a single cliffhanger mounted to a sturdy board, allowing for multiple grip options. Athletes can grab onto the cliffhanger.…

Take your grip training to the next level with the Monstro Pro Bungee Grips! Made from premium shock cord, they offer approximately 1.5 inches in gripping diameter and extend about 12 inches from the included Black Oxide Ring. Unlike the standard Bun…

Challenge your grip strength and endurance with the Monstro Bungee Grips! Made from premium shock cord, they offer approximately 1 inch in gripping diameter and extend about 12 inches from the included Black Oxide Ring. The three shock cords are tied…

The Makercraft V-Formation Module offers a dynamic grip challenge with its angled design and multiple diameter options.Shaped like a V and made of steel, this unique module is designed to mount directly to The Spine v2. Whether you're training for po…

The Makercraft T-Handle Module adds simple, effective grip training to your Spine v2 setup. Shaped like a T and made from steel, this handlebar-style obstacle is great for building strength, control, and grip variety. Mount it directly to The Spine v…

The iconic Bullseye obstacle has been reimagined as a mountable module for The Spine v2! Designed to deliver the same creative challenge as the original, the Bullseye Module features the signature look complete with four curved Special Delivery-style…

Add creative freedom to The Spine v2 with the Makercraft Any Angle. This steel connector lets you rotate Spine modules into fourteen unique vertical or horizontal positions, unlocking a wide range of challenge levels and obstacle configurations. Usin…

Enhance your Parkour setup with the versatile Pop Up Parkour Planks. These planks connect seamlessly using 8" hook connectors on both the top and bottom ends. This unique design allows for stacking or configuring the planks into various shapes for...

The Pop Up Parkour Quad Steps are essential elements for your parkour training regimen. Use them individually or connect them together to create various shapes for vaults, jumps, and more. Crafted with durable materials, including 18 oz. coated vinyl…

Discover the versatility of the Pop Up Parkour Road Block, available in two convenient options to suit your training needs. Choose between purchasing the Wall Section individually or as a 5-Piece Set, which includes the Wall Section along with four Q…