Equipment

Use hitch pins to mount The Spine modules! It includes an easy-swivel, big-grip handle, and high-tension hairpin cotter. The pin is 4" in length and crafted from 1038 and 4140 steel with a yellow zinc finish. 

Compatible:ST-UJB-12 Corner JunctionPack of 4 Bolt Size: M12 x 25mm

The Aluminum Truss Coupler provides a secure connection between truss segments, ensuring stability and safety in the overall truss structure.

6-Way Universal Junction Block 2-Sets of Connecting Hardware Included 11 7/16" (290mm) Overall Width 2" (50mm) Outer Diameter Tubing 3/4" (20mm) Diagonal Bracing 0.08" (2mm) Wall Thickness 8.17 kgs / Lbs…

The Floating Skyhook was developed by Matt Bradley and made here at our DGS Ninja facility. Hang this versatile obstacle in a variety of different manners to create numerous challenges for ninjas of all levels. The Floating Skyhook is 9.5" …

A cow bell you can connect to your climbing ropes or nets. Bells come with an attached break away lanyard making it easy to attach to equipment. 3.25 bell; 36 x 3/4 lanyard.

Slip on to the bottom of any 1.5 dia. climbing rope and tie knot under disc to form a seat or platform. 12 dia. X 3/4 thick poly disc; 1.5 I.D. center hole. NOTE: Can be added to any Jammar climbing rope PRIOR to fabricati…

15 wide X 1.25 hardwood dowel connected to 1/2 poly Dacron rope together to form an additional obstacle for your overhead challenge course. Metal thimbles on top for attachment and rope eye-loops under the bar for anchoring or connecting additional..…

Jammar has connected a 15 wide X 1.25 hardwood dowel to 1/2 poly Dacron rope together to form an additional obstacle for your overhead challenge course. Metal thimbles on top for attachment and rope eye-loops under the bar for anchoring or connecting…

Handcrafted a monkey fist style knot using 3/8 poly Dacron rope together to form a entirely different kind of ninja grab.  Attached to a rope lanyard with metal thimble at the top. Approximately 14 of grab rope. Available in Red, Black or Blue …

A semi-spherical grip training device with an embedded J-hook allowing you to take the sphere with you and train precise moves.   Specifications: 2.75 in diameter flat surface for easy storage Grippy texture 3/8 zinc-played J-hook

Sometimes even the most simple training tools can benefit from a little design refresh. Monstro's pure polyurethane pegs are 1-1/4 in diameter, come in a variety of colors and will not swell or splinter with the changing seasons. Not meant for lungin…

The Peg Grasper is a simple hold that takes a common design and turns it into something completely new and extremely functional. Unlike any other door knob or ring toss, the Peg Grasper can also take a 1-1/4 inch peg, standard peg board size, allowin…

The Peg Grasper transforms a familiar design into something entirely innovative and highly functional. Distinct from typical door knobs or ring tosses, it can be used with a Monstro 1-1/4" inch peg, opening up a variety of uses within a compact footp…

The 111 Obstacles Rodeo Rope adds a new twist to just about anything in your gym. This obstacle is 3ft long and is wrapped in a grippy vinyl covering. Pair the Rodeo Rope with 111 Obstacles The One for another challenge. ...…

These clamps are designed to fit our DGS Ninja Truss or DGS Ninja Slider Rails and hold a 1.25" (1.66 OD) Cross Pipe.. Easily tighten and loosen with two allen head set screws Safety clip holds clamp on t…

Three-piece agility bridge for junior ninja courses. This Obstacle allows your ninja athletes to leap over, run across, or duck under the "bridge." The three-pieces are securely held together with hook-and-loop tabs so you can easily disassemble…

The Pads wrap around the base of your Elite Kids Apparatus. Sold as a set of 2 in Lime Green.